Preparing for Use
R&S
®
SMBV100A
19Operating Manual 1407.6062.32 ─ 08
2.1.1 Utility Keys
The keys to the left of the display cause the R&S SMBV to return to a definite instrument
state and provide information on the instrument and assistance.
For more information refer to chapter "Instrument Settings".
PRESET
Sets the instrument to a defined state (see chapter 2.3.4.4, "Default Set-
tings", on page 34).
LOCAL
Switches from remote control to local (manual) control.
SETUP
Opens the "Setup" dialog for configuring presettings.
For more information, see chapter 5.2.3, "General Configuration of Instrument - Setup
Key", on page 105.
HCOPY
Opens the "Hardcopy" menu for configuring and starting printing.
For more information, see chapter 5.2.5, "Generating a Hard Copy of the Dis-
play", on page 133.
INFO
Displays status messages, error messages and warnings.
HELP
Displays context-sensitive help text.
2.1.2 Standby LEDs and Standby Key
The standby LEDs and the ON/STANDBY key are located in the bottom left corner of the
front panel.
The ON/STANDBY key toggles the instrument between standby and ready state (indi-
cated by the standby LEDs).
The standby LEDs indicate the instrument states as follow:
●
the green LED (left) is on when the instrument is ready for operation,
Front Panel Tour
To Next Page
Loading...
