Rohde & Schwarz SMBV100A - Graphical Display of Output Signal Characteristics

Manual Operation
R&S
®
SMBV100A
75Operating Manual 1407.6062.32 ─ 08
4.2.7 Graphical Display of Output Signal Characteristics
The graphical display of the output signal enables the user to rapidly check signal char-
acteristics without connecting an analyzer. Zoom functions and the display of a reference
trace allow in-depth evaluation. The diagram is displayed on top of the block diagram. It
can be minimized and called in the same way as a menu.
Example: Constellation Diagram
To access the "Graphics Settings" dialog for selecting the graphics display of the output
signal, select the "Graphics" function block in the diagram or press the MENU (CTRL+M)
key.
Operation of the graphics windows is analogous to menu operation.
The menu and the individual graphical displays are described in chapter 5.3, "Graphical
Display - Graphics", on page 144.
4.3 Accessing Dialogs
The MENU (CTRL+M) key opens the complete menu tree. Selecting a functional block
and pressing the ENTER key opens the menu associated with this block.
An alternatively way to access a dialog is to use the Winbar buttons or front-panel softkeys
or to use the HIDE (CTRl+H), CLOSE (ESC), DIAGRAM (CTRL+D) and REARR (CTRL
+A) keys on the front panel.
For a quick access to the dialogs, use one of the following alternative methods.
Displaying the block diagram or a dialog in the foreground
1. Press the DIAGRAM (CTRL+D) key to move the cursor to the block diagram.
All active menus are minimized and displayed in the form of Winbar buttons.
2. Press the associated softkey (CTRL+F1 .. F8) to display the dialog in the foreground
again.
Accessing Dialogs