Rohde & Schwarz SMBV100A - [: S Ource<Hw>]: L IST: D Exchange: a File: S Eparator: D Ecimal; [:Source<Hw>]:List:dexchange:execute

Remote Control Commands
R&S
®
SMBV100A
661Operating Manual 1407.6062.32 ─ 08
Example:
LIST:DEXC:MODE EXP
selects that the list mode list is exported into an ASCII file.
LIST:DEXC:AFIL:SEL
'/var/smbv/user/listmode/import/list.csv'
selects ASCII file list.csv as destination for the list mode list
data.
LIST:DEXC:AFIL:SEP:COL TAB
the pairs of frequency and level values are separated by a tabu-
lator.
LIST:DEXC:AFIL:SEP:DEC DOT
selects the decimal separator dot.
LIST:DEXC:SEL
'/var/smbv/user/listmode/import/list_imp'
selects that the list mode list list_imp is imported into ASCII file
list.csv.
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal <Decimal>
The command the decimal separator used in the ASCII data between '.' (decimal point)
and ',' (comma) with floating-point numerals.
Parameters:
<Decimal> DOT | COMMa
*RST: DOT
Example:
LIST:DEXC:MODE EXP
selects that the list mode list is exported into an ASCII file.
LIST:DEXC:AFIL:SEL
'/var/smbv/user/listmode/import/list.csv'
selects ASCII file list.csv as destination for the list mode list
data.
LIST:DEXC:AFIL:SEP:COL TAB
the pairs of frequency and level values are separated by a tabu-
lator.
LIST:DEXC:AFIL:SEP:DEC DOT
selects the decimal separator dot.
LIST:DEXC:SEL
'root/var/smbv/user/listmode/import/list_imp'
selects that the list mode list list_imp is imported into ASCII file
list.csv.
[:SOURce<hw>]:LIST:DEXChange:EXECute
The command starts the export or import of the selected file. When import is selected,
the ASCII file is imported as list mode list. When export is selected, the list mode list is
exported into the selected ASCII file.
SOURce Subsystem