Rohde & Schwarz SMBV100A - Sense<Ch>: U NIT[: P Ower]; Source Subsystem

Remote Control Commands
R&S
®
SMBV100A
493Operating Manual 1407.6062.32 ─ 08
Example:
SENS:ZERO
activates autozero function.
Usage: Event
SENSe<ch>:UNIT[:POWer] <Power>
The command selects the unit used for result query with command READ. The power
sensor provides the measured value in Watt. In which unit the measured value is returned
is selected here and might be either Watt, dBm or dBuV.
Parameters:
<Power> DBM | DBUV | WATT
*RST: DBM
Example:
SENS2:UNIT DBM
selects unit dBm for the measured value returned by command
READ.
READ2?
Response: 7.34
7.34 dBm are measured by sensor 2.
7.14 SOURce Subsystem
The SOURce subsystem contains the commands for configuring the digital and analog
signals.
SOURce<hw>
For one-path instruments, the keyword SOURce is optional and can be omitted.
● SOURce:AM Subsystem.......................................................................................494
● SOURce:AWGN Subsystem.................................................................................496
● SOURce:BB Subsystem.......................................................................................503
● SOURce:BBIN Subsystem....................................................................................610
● SOURce:CORRection Subsystem........................................................................615
● SOURce:FM Subsystem.......................................................................................623
● SOURce:FREQuency Subsystem.........................................................................626
● SOURce:INPut Subsystem...................................................................................634
● SOURce:IQ Subsystem........................................................................................637
● SOURce:IQ:OUTput Subsystem...........................................................................640
● SOURce:LFOutput Subsystem.............................................................................647
● SOURce:LIST Subsystem.....................................................................................656
● SOURce:MODulation Subsystem.........................................................................669
● SOURce:PGEN Subsystem..................................................................................669
● SOURce:PHASe Subsystem................................................................................670
● SOURce:PM Subsystem.......................................................................................671
● SOURce:POWer Subsystem................................................................................674
SOURce Subsystem