Instrument Function
R&S
®
SMBV100A
132Operating Manual 1407.6062.32 ─ 08
5.2.3.17 Save/Recall
The "Save/Recall" submenu can also be called up with the FILE key and is therefore
described in the section of this key (see chapter 5.2.8, "Storing and Loading Instrument
Data - File Key", on page 138).
5.2.3.18 Factory Preset
The "Factory Preset" dialog provides a function to reset the instrument's settings to their
factory state. This function is activated by pressing the "Execute Factory Preset" button.
Factory Preset
Reset the instrument's settings to their factory state.
Note: Since Factory Preset resets the Remote Channel and network settings to the
default values, executing Factory Preset via remote control terminates the connection to
the instrument, if these settings had been configured to values different to the default
ones!
The factory preset function resets nearly all instrument settings. In addition to the regular
preset by means of the PRESET key, a "Factory Preset" resets also the following values:
●
Reference frequency settings ("Ref Oscillator" menu)
●
Power on settings ("Level/EMF" menu)
●
Network settings including hostname ("Setup" menu)
●
Remote Channel settings including GPIB address ("Setup" menu)
●
Start/Stop Gui Update ("Setup" menu)
●
Display and keyboard settings ("Setup" menu).
To maintain security, password settings and all settings protected by these passwords
like disabled USB and LAN connections are not changed.
Not affected by the "Factory Preset" are also user data, lists or instrument settings files,
created for example by means of the Save/Recall function.
SCPI command:
:SYSTem:FPReset on page 438
5.2.3.19 Help
The "Help" dialog offers comprehensive online help for the R&S Signal Generator. A
desired topic can be selected via the table of contents (select "Manual") or the index
(select "Index").
For context-sensitive information about a marked parameter, press the HELP key. For a
description of the "Help" menu, refer to the section covering to the HELP key (see chap-
ter 5.2.7, "Help System - Help Key", on page 137).
General Instrument Settings
To Next Page
Loading...
