Rohde & Schwarz SMBV100A - [:Source<Hw>]:Bb:DM:flist:points

Remote Control Commands
R&S
®
SMBV100A
579Operating Manual 1407.6062.32 ─ 08
The modulation data in this data list is used when the data source is selected using the
command SOURce:BB:DM:SOURce DLISt.
Setting parameters:
<Select> <list name>
Example:
BB:DM:DLIS:SEL 'd_list2'
selects data list d_list2.
Usage: Setting only
[:SOURce<hw>]:BB:DM:FLISt:DELete <Filename>
Deletes the secified user filter file. The default directory is set using command
MMEM:CDIRectory. A path can also be specified, in which case the files in the specified
directory are read. The file extension may be omitted. Only files with the file extension
*.vaf*.vaf will be deleted.
Setting parameters:
<Filename> string
Example:
BB:DM:FILT:TYPE USER
selects the User filter type.
MMEM:CDIR '/var/smbv/user/Filter_List'
sets the default directory for the user-defined filters.
BB:DM:FLIS:DEL user_filter3
deletes the user-defined filter.
Usage: Setting only
[:SOURce<hw>]:BB:DM:FLISt:POINts?
Queries the user filter list length.
Return values:
<Points> integer
Range: 0 to INT_MAX
Increment: 1
*RST: 0
Example:
BB:DM:FILT:TYPE USER
selects the User filter type.
BB:DM:FLIS:POIN?
queries the list length.
Usage: Query only
[:SOURce<hw>]:BB:DM:FLISt:SELect <Filename>
The command selects the user-defined filter (*.vaf).
SOURce Subsystem