Rohde & Schwarz SMBV100A - [: S Ource<Hw>]: L IST: D Elete; [:Source<Hw>]:List:delete:all

Remote Control Commands
R&S
®
SMBV100A
658Operating Manual 1407.6062.32 ─ 08
Example:
MMEM:CDIR '/var/smbv/Lists/Listmode'
selects the directory for the list mode files.
LIST:CAT?
queries the available lists.
Response: 'list1,list2'
the lists list1 and list2 are available.
Usage: Query only
[:SOURce<hw>]:LIST:DELete <Delete>
The command deletes the specified list.
The files are stored with the fixed file extensions *.lsw in a directory of the user's choice.
The directory applicable to the command is defined with the command MMEMory:CDIR.
To access the files in this directory, only the file name has to be given, without the path
and the file extension. A path can also be specified in command :SOUR:LIST:CAT?, in
which case the file in the specified directory is deleted.
*RST does not affect data lists.
Setting parameters:
<Delete> <list file name>
Example:
MMEM:CDIR '/var/smbv/Lists/Listmode'
selects the directory for the list mode files.
LIST:DEL 'LIST1'
deletes the list list1.
Usage: Setting only
[:SOURce<hw>]:LIST:DELete:ALL
The command deletes all lists in the set directory. The List mode must be deactivated
beforehand to ensure that no lists are selected when this command is called
(SOUR:FREQ:MODE CW or SWE).
The files are stored with the fixed file extensions *.lsw in a directory of the user's choice.
The directory applicable to the command is defined with the command MMEMory:CDIR.
A path can also be specified in command SOUR:LIST:CAT?, in which case all list mode
files in the specified directory are deleted.
*RST does not affect data lists.
SOURce Subsystem