Rohde & Schwarz SMBV100A - H Copy: F ILE[: N AME]: a UTO: S Tate; Kboard Subsystem

Remote Control Commands
R&S
®
SMBV100A
471Operating Manual 1407.6062.32 ─ 08
Example:
HCOP:FILE:AUTO:YEAR:STAT OFF
deactivates the usage of the year in the automatic file name.
:HCOPy:FILE[:NAME]:AUTO:STATe <State>
This command activates/deactivates automatic naming of the hardcopy files.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: ON
Example:
HCOP:FILE:AUTO:STAT OFF
deactivates automatic naming.
:
HCOPy:IMAGe:FORMat <Format>
This command selects the bitmap graphic format for the screenshot. It is also possible
to directly retrieve the data using command HCOP:DATA?.
This command is an alias to command HCOPy:DEVice:LANGuage.
Parameters:
<Format> BMP | JPG | XPM | PNG
*RST: BMP
Example:
HCOP:IMAG:FORM XPM
selects the image format XPM.
:HCOPy:IMAGe:SIZE <Size>
The command selects the image size of the hardcopy. The first value of the size setting
defines the width, the second value the height of the image.
Parameters:
<Size> 320,640 | 640,480 | 800,600 | 1024,768
*RST: depends on device
Example:
HCOP:IMAG:SIZE 640,480
sets width and height of the image.
7.10 KBOard Subsystem
The KBOard system contains the commands to set the external keyboard.
:KBOard:LANGuage.......................................................................................................472
:KBOard:LAYout............................................................................................................472
KBOard Subsystem