Rohde & Schwarz SMBV100A - Date and Time

Instrument Function
R&S
®
SMBV100A
118Operating Manual 1407.6062.32 ─ 08
5.2.3.10 Date and Time
The "Date/Time..." dialog provides access to the system time and date settings. It is
opened using the SETUP or MENU key under "Environment". The time is used on the
internal controller.
To prevent accidental changes, "Date" and "Time" are protected functions. They can be
accessed with protection level 1, see chapter 5.2.3.15, "Protection", on page 127.
Date
Indicates the date in the format day.month.year.
In order to prevent accidental changes, this parameter is protected. It can be accessed
with protection level 1, chapter 5.2.3.15, "Protection", on page 127.
SCPI command:
:SYSTem:DATE on page 711
Time
Indicates the time in the format hour.minute.second
In order to prevent accidental changes, this parameter is protected. It can be accessed
with protection level 1, see chapter 5.2.3.15, "Protection", on page 127.
SCPI command:
:SYSTem:TIME on page 717
5.2.3.11 Network Settings
The "Network Settings" dialog provides access to the network settings. To access this
dialog, press the SETUP or MENU key under "Environment". The R&S SMBV is equipped
with a network interface and can be connected to an Ethernet LAN (local area network).
General Instrument Settings