Rohde & Schwarz SMBV100A - General Instrument Settings

Instrument Function
R&S
®
SMBV100A
103Operating Manual 1407.6062.32 ─ 08
●
Digital standard 3GPP FDD (WCDMA)
see description "Digital Standard 3GPP FDD (WCDMA)
●
Digital standard CDMA2000®
see description "Digital Standard CDMA2000®"
●
Digital standard TD-SCDMA
see description "Digital Standard TD-SCDMA"
●
Digital standard 1xEV-DO
see description "Digital Standard 1xEV-DO"
●
Digital standard IEEE 802.11 (a/b/g) (WLAN)
see description "Digital Standard IEEE 802.11 (a/b/g) (WLAN)"
●
Digital standard IEEE 802.11n (WLAN-N)
see description "Digital Standard IEEE 802.-11n (WLAN-N)"
●
Digital standard IEEE 802.16 (WiMAX)
see description "Digital Standard IEEE 802.16 (WiMAX)"
●
Digital Standard EUTRA/LTE
see description “Digital Standard EUTRA/LTE”
●
Digital Standard XM Radio
see description “Digital Standard XM Radio”
●
Digital Standard DVB-H
see description “Digital Standard DVB-H”
●
Digital Standard DAB / T-DMB
see description “Digital Standard DVB / T-DMB”
5.2 General Instrument Settings
5.2.1 Overview of General Instrument Settings
This section describes the settings which do not directly affect signal generation. Most of
these settings can only be accessed by means of menus which are opened using keys
or key combinations on the external keyboard or keys on the front panel key emulation.
This does not apply to the graphical representation of output signals which is activated
in the "Graphics" function block, or settings which can additionally be called up in the
menus of the function blocks, e.g. input configuration which is possible in the "Setup"
menu and in almost every menu of the "Baseband" function block.
See also chapter 4.8, "Legend of Front-Panel Controls", on page 98.
The general instrument settings therefore affect various functions, such as storing instru-
ment settings using the FILE key or setting the GPIB address in the menu of the
SETUP key. The order in which the descriptions are given corresponds to the layout of
the keys on the front panel of the R&S SMBV (from top left to bottom right).
General Instrument Settings