Rohde & Schwarz SMBV100A - Messages - Info Key

Instrument Function
R&S
®
SMBV100A
136Operating Manual 1407.6062.32 ─ 08
"Prefix"
Activates the usage of the prefix in the automatic file name. The prefix
is entered in the field to the right of checkbox.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe on page 470
"Enter prefix"
Enters the prefix for the automatically generated file name. The use of
the prefix is activated in the checkbox to the left.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix on page 470
"Date - Year /
Month / Day"
Defines the components of the automatically generated file name. The
selectable parameters are year, month and day. If activated the current
year, month or day used in the file name.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe on page 470
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe on page 469
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe on page 469
"Current Auto
Number"
Indicates the number which is used in the automatically generated file
name.
Note: On initially switching on the device the number will be reset to
the lowest possible value. Starting with number 0 the output directory
will be scanned for already existing files. As long as files with the same
name are existing the number will be increased by 1. The number will
be automatically set to a number so that the resulting file name will be
unique within the selected path. The current number will not be saved
in the save recall file but will be temporarily stored within the database.
On subsequent saves the number will be increased.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer on page 469
"Resulting File
Name"
Indicates the automatically generated file name.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO:FILE on page 468
Save
Triggers the generation of a hardcopy.
SCPI command:
:HCOPy[:EXECute] on page 466
5.2.6 Messages - Info Key
The INFO key opens a window containing a detailed description of every message dis-
played in the info bar, see chapter 4.2.3, "Info Window", on page 70 and chapter 9, "Error
Messages", on page 727.
General Instrument Settings