Instrument Function
R&S
®
SMBV100A
135Operating Manual 1407.6062.32 ─ 08
File Options
Dialog for setting the file parameters.
"Size"
Defines the size of the bitmap in terms of pixels. The first value of the
size setting defines the width, the second value the height of the image.
SCPI command:
:HCOPy:IMAGe:SIZE on page 471
"Format"
Selects the image format. Several bitmap formats are available.
SCPI command:
:HCOPy:DEVice:LANGuage on page 466
"Automatic
Naming"
Determines the rules to create the file names and sets the directory the
files are saved into.
As default the automatically generated file name is composed of:
<Path>/<Prefix><YYYY><MM><DD><Number>.<Format>
Each component can be deactivated/activated separately to individu-
ally design the file name. The resulting file name is indicated.
"Path..."
Opens the "Select Hard Copy Destination Path" dialog to select a path
for storing the hardcopy.
Note: For selecting the destination path a file name must be entered
as well. Otherwise the error message "The name of a list may not be
empty" is displayed and the selection will be canceled.
Directory, path and file name are displayed in the infoline right to the
"Path" button.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory on page 467
:HCOPy:FILE[:NAME]:AUTO on page 467
"Clear Path"
Deletes all image files with extensions bmp, img, png, xpm and csv in
the directory set for automatic naming.
Before deleting the image files a warning message is displayed requir-
ing the confirmation.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar on page 468
General Instrument Settings
To Next Page
Loading...
