Rohde & Schwarz SMBV100A - [:Source<Hw>]:Bb:DM:mlist:points

Remote Control Commands
R&S
®
SMBV100A
580Operating Manual 1407.6062.32 ─ 08
The directory applicable to the following command is defined with the command
MMEM:CDIRectory. To access the files in this directory, only the file name is required,
without the path and the file extension.
Parameters:
<Filename> string
Example:
BB:DM:FILT:TYPE USER
selects the User filter type.
MMEM:CDIR '/var/smbv/user/Filter_List'
sets the default directory for the user-defined filters.
BB:DM:FLIS:SEL user_filter3
selects the user-defined filter.
[:SOURce<hw>]:BB:DM:MLISt:DELete <Filename>
Deletes the secified user mapping file. The default directory is set using command
MMEM:CDIRectory. A path can also be specified, in which case the files in the specified
directory are read. The file extension may be omitted. Only files with the file extension
*.vam will be deleted.
Setting parameters:
<Filename> string
Example:
BB:DM:FORM USER
selects the User modulation type.
MMEM:CDIR '/var/smbv/user/mapping_List'
sets the default directory for the user mapping lists.
BB:DM:MLIS:DEL user_mapping3
deletes the user mapping list.
Usage: Setting only
[:SOURce<hw>]:BB:DM:MLISt:POINts?
Queries the user modulation mapping list length.
Return values:
<Points> integer
Range: 0 to INT_MAX
Increment: 1
*RST: 0
Example:
BB:DM:FORM USER
selects the User modulation type.
BB:DM:MLIS:POIN?
queries the list length.
Usage: Query only
SOURce Subsystem