Preparing for Use
R&S
®
SMBV100A
18Operating Manual 1407.6062.32 ─ 08
2 Preparing for Use
The following topics will help you to get familiar with the instrument and perform the first
steps:
● Front Panel Tour
● Rear Panel Tour
● Putting into Operation
This section explains the control elements and connectors of the Signal Generator R&S
SMBV with the aid of the front and rear views and describes how to put the instrument
into operation. It also describes the connection of peripherals such as printer, keyboard
or mouse. Specifications of interfaces can be found in the data sheet.
The chapter 3, "Getting Started", on page 50 of this manual provides an overview of
the generator functions and introduces the operating concept. Detailed operating instruc-
tions and an overview of menus follow in chapter 4, "Manual Operation", on page 63.
For all reference information concerning manual and remote control of the instrument
refer to the online help system or its printed/printable version. A more detailed description
of the hardware connectors and interfaces is also part of the help system.
2.1 Front Panel Tour
The front panel of the R&S Signal Generator consists of the VGA display, some utility
keys (left side) and the hardkey area with connectors and control interfaces (right side).
The subsequent sections provide brief explanations on the controls and connectors, the
hardkey area and the front panel.
Fig. 2-1: Front panel view
Front Panel Tour
To Next Page
Loading...
