Instrument Function
R&S
®
SMBV100A
117Operating Manual 1407.6062.32 ─ 08
Delete Temporary Files
Execute this function to delete the temporary files from the directory /var/smbv/unicod.
The content of this directory are temporary files such as the wavefiles (*.wv) of all ARB
standards. Deleting the temporary files maintains sufficiant amount of free disc space on
the internal flash memory.
Another way to achieve more free disc space on the internal flash memory is to execute
the "Factory Preset" function.
SCPI command:
:SYSTem:FILes:TEMPorary:DELete on page 712
5.2.3.8 Selftest
A selftest is provided for service purposes. The selftest is a protected test procedure,
which can be accessed if protection level 1 is disabled. The protection dialog is called in
the "Setup" menu (see chapter 5.2.3.15, "Protection", on page 127).
The following tests are only available via remote control:
● :TEST<hw>:DIRect on page 719
Selftest
Performs a selftest on all installed hardware options.
A list of the performed tests cases and the result of each of them (passed or failed) is
displayed.
SCPI command:
:TEST<hw>:ALL:STARt on page 718
:TEST<hw>:ALL:RESult on page 719
5.2.3.9 Check Front Panel
The "Check Front Panel" dialog is used to check whether the front panel keys are func-
tioning correctly. The menu displays all the front panel keys arranged in the same way
as on the front panel. The respective function is executed by pressing the associated key.
General Instrument Settings
To Next Page
Loading...
