EasyManua.ls Logo

Rohde & Schwarz SMBV100A - Trigger Settings

Rohde & Schwarz SMBV100A
780 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Control Commands
R&S
®
SMBV100A
508Operating Manual 1407.6062.32 ─ 08
This parameter is used to enable generation of very precise synchronous signal of several
connected R&S SMBVs.
Note: If several instruments are connected, the connecting cables from the master
instrument to the slave one and between each two consecutive slave instruments must
have the same length and type. Avoid unnecessary cable length and branching points.
Parameters:
<Mode> NONE | MASTer | SLAVe
NONE
The instrument is working in stand-alone mode.
MASTer
The instrument provides all connected instrument with its syn-
chronisation (including the trigger signal) and reference clock sig-
nal.
SLAVe
The instrument receives the synchronisation and reference clock
signal from another instrument working in a master mode.
*RST: NONE
Example:
BB:ARB:CLOC:SYNC:MODE MAST
The instrument is configured to work as a master one.
[:SOURce<hw>]:BB:ARB:CLOCk:SYNChronization:EXECute
Performs automatically adjustment of the instrument's settings required for the synchro-
nization mode, set with the command [:SOURce<hw>]:BB:ARB:CLOCk:
SYNChronization:MODE.
Example:
BB:ARB:CLOC:SYNC:MODE MAST
the instrument is configured to work as a master one.
BB:ARB:CLOC:SYNC:EXEC
all synchronization's settings are adjusted accordingly.
Usage: Event
Trigger Settings
[:SOURce<hw>]:BB:ARB:TRIGger:ARM:EXECute............................................................509
[:SOURce<hw>]:BB:ARB:TRIGger:EXECute.....................................................................509
[:SOURce<hw>]:BB:ARB:TRIGger:EXTernal:SYNChronize:OUTPut...................................509
[:SOURce<hw>]:BB:ARB:TRIGger:OUTPut:DELay:FIXed..................................................510
[:SOURce<hw>]:BB:ARB:TRIGger:OUTPut<ch>:DELay....................................................510
[:SOURce<hw>]:BB:ARB:TRIGger:OUTPut<ch>:DELay:MAXimum....................................511
[:SOURce<hw>]:BB:ARB:TRIGger:OUTPut<ch>:DELay:MINimum......................................511
[:SOURce<hw>]:BB:ARB:TRIGger:RMODe......................................................................511
[:SOURce<hw>]:BB:ARB:TRIGger:SLENgth.....................................................................512
[:SOURce<hw>]:BB:ARB:TRIGger:SLUNit........................................................................512
[:SOURce<hw>]:BB:ARB:TRIGger:SMODe......................................................................513
[:SOURce<hw>]:BB:ARB:TRIGger:SOURce.....................................................................513
[:SOURce<hw>]:BB:ARB:TRIGger[:EXTernal<1|2>]:DELay................................................514
SOURce Subsystem

Table of Contents

Other manuals for Rohde & Schwarz SMBV100A

Related product manuals