Rohde & Schwarz SMBV100A - COMMENT: String; COPYRIGHT: String; DATA BITLENGTH: Bitlength

Remote Control Commands
R&S
®
SMBV100A
442Operating Manual 1407.6062.32 ─ 08
Usage: Setting only
{COMMENT: string}
The tag contains a plain text ASCII string of arbitrary length. The string is not analyzed
in the R&S SMBV. It is used to describe the file. The string is allowed to contain all print-
able ASCII characters except the closing curly bracket.
Example:
{COMMENT: File with data for 3GPP enhanced
channels}
BB:ARB:WAV:TAG? 'COMMENT'
queries the content of the COMMENT tag of the selected waveform
file.
Response: 'File with data for 3GPP enhanced
channels'
the comment on the waveform reads "File with data for 3GPP
enhanced channels".
Usage: Setting only
{COPYRIGHT: string}
The tag contains an ASCII string of arbitrary length. The string is not analyzed in the R&S
SMBV. It is used to store copyright information about the file content.
Example:
{COPYRIGHT: Rohde&Schwarz}
BB:ARB:WAV:TAG? 'COPYRIGHT'
queries the content of the COPYRIGHT tag of the selected wave-
form file.
Response: 'Rohde&Schwarz'
copyright resides with Rohde&Schwarz.
Usage: Setting only
{DATA BITLENGTH: BitLength}
(mandatory for data lists)
The tag contains the length of the data held in the DATA LIST tag in bits in ASCII format.
Example:
{DATA BITLENGTH: 444}
BB:DM:DLIS:TAG? 'DATA BITLENGTH'
queries the content of the DATA BITLENGTH tag of the selected
data list file.
Response: '444'
the data list is 444 bits long.
Usage: Setting only
R&S Signal Generator Waveform and List Format