EasyManua.ls Logo

Rohde & Schwarz SMBV100A - Source:frequency Subsystem

Rohde & Schwarz SMBV100A
780 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Control Commands
R&S
®
SMBV100A
626Operating Manual 1407.6062.32 ─ 08
Parameters:
<Source> INT | EXT | INT,EXT
INT
INT is the LF generator. The frequency of the internal modulation
signal can be set in the SOURce:LFOutput subsystem.
EXT
The external signal is input at the EXT MOD connector.
*RST: INTernal
Example:
FM:SOUR INT
selects the internal modulation source.
Usage: SCPI confirmed
[:SOURce<hw>]:FM:STATe <State>
The command activates/deactivates frequency modulation.
Activation of FM (FM:STAT ON) deactivates phase modulation.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: OFF
Example:
FM:STAT ON
Activates FM modulation.
Usage: SCPI confirmed
7.14.7 SOURce:FREQuency Subsystem
This subsystem contains the commands used to define the frequency settings for the RF
sources and sweeps.
[:SOURce<hw>]:FREQuency:CENTer..............................................................................627
[:SOURce<hw>]:FREQuency:LOSCillator:MODE..............................................................627
[:SOURce<hw>]:FREQuency:LOSCillator:OUTPut:STATe.................................................628
[:SOURce<hw>]:FREQuency[:CW|:FIXed]........................................................................628
[:SOURce<hw>]:FREQuency[:CW|:FIXed]:RCL................................................................628
[:SOURce<hw>]:FREQuency:MANual..............................................................................629
[:SOURce<hw>]:FREQuency:MODE................................................................................630
[:SOURce<hw>]:FREQuency:MULTiplier..........................................................................630
[:SOURce<hw>]:FREQuency:OFFSet..............................................................................631
[:SOURce<hw>]:FREQuency:SPAN.................................................................................631
[:SOURce<hw>]:FREQuency:STARt................................................................................632
[:SOURce<hw>]:FREQuency:STOP.................................................................................632
[:SOURce<hw>]:FREQuency:STEP[:INCRement].............................................................633
[:SOURce<hw>]:FREQuency:STEP:MODE......................................................................633
SOURce Subsystem

Table of Contents

Other manuals for Rohde & Schwarz SMBV100A

Related product manuals