Instrument Function
R&S
®
SMBV100A
142Operating Manual 1407.6062.32 ─ 08
If the list has been deleted in the meantime, an error message appears when the instru-
ment setting is loaded. If the list has been overwritten in the meantime, the new entries
will be used.
SCPI command:
:MMEMory:LOAD:STATe on page 481
*RCL on page 436
Recall Immediate x
Loads the selected configuration from one of the three intermediate memories.
If an instrument setting in which a sweep was activated is stored, the sweep is started
when the recall command is called.
If an instrument setting which accesses lists is stored, this list is also loaded.
If the list has been deleted in the meantime, an error message appears when the instru-
ment setting is loaded. If the list has been overwritten in the meantime, the new entries
will be used.
A message appears if no instrument configuration is stored in this memory.
SCPI command:
*RCL on page 436
5.2.8.4 File Manager
The "File Manager" dialog provides all the functions required for file management. Direc-
tories can be created, and files copied, deleted and moved between the directories on
the drives (internal flash card, memory stick and hard disk (requires option R&S SMBV-
B92)).
For more information, see chapter 4.7.2, "File Manager", on page 94.
File Type
Selects the file types to be indicated. If a file type with a specific file extension is selected
only files with this extension are indicated in the selected directory.
SCPI command:
n.a.
General Instrument Settings
To Next Page
Loading...
