Instrument Function
R&S
®
SMBV100A
143Operating Manual 1407.6062.32 ─ 08
Directory and File Name
Selects the directory in which the file to be deleted or copied is located. The window lists
all files in this directory. The file to be deleted or copied can be highlighted. The path is
indicated above the directory window.
SCPI command:
:MMEMory:CDIRectory on page 478
Cut
Cuts the selected file. It can be pasted into a different directory using the "Paste" button.
SCPI command:
:MMEMory:DELete on page 480
Copy
Copies the selected file. It can be pasted into a different or the same directory using the
"Paste" button. When pasting the file into the same directory file name Copy of <file
name> is given automatically. When pasting the file into a different directory, the original
file name is kept.
SCPI command:
:MMEMory:COPY on page 478
Paste
Pastes the file that has been copied or cut before.
SCPI command:
n.a.
Rename
Renames the selected file or directory. The new name can be entered in the "New File-
name" dialog.
SCPI command:
:MMEMory:MOVE on page 481
Delete
Deletes the selected file. Before the file is deleted, a message appears prompting the
user to confirm deletion of the file.
SCPI command:
:MMEMory:DELete on page 480
Create New Directory
Creates a new directory. The name of the new directory can be entered in the "New
Directory" dialog.
Note: When the subdirectory is entered, it is possible to enter an absolute path name
(e.g. /var/smbvUSER/MEAS) or the path relative to the current directory (e.g. ../
MEAS).
The directory is created as a subdirectory in the selected level.
SCPI command:
:MMEMory:MDIRectory on page 481
General Instrument Settings
To Next Page
Loading...
