Rohde & Schwarz SMBV100A - Page 495

Remote Control Commands
R&S
®
SMBV100A
478Operating Manual 1407.6062.32 ─ 08
Return values:
<path> <used_memory>,<free_memory>,<file_name>,<file_entry>,...
<used_memory>
Total amount of storage currently used in the directory, in bytes.
<free_memory>
Total amount of storage available in the directory, in bytes.
<file_entry>
All files of the directory are listed with their file name, format and
size in bytes.
Example:
See "Working with Files and Directories" on page 476.
Usage: Query only
:MMEMory:CATalog:LENGth?
Returns the number of files in the current or in the specified directory.
Return values:
<Length> <path>
String parameter to specify the directory. If the direcory is omitted,
the command queries the content of the current directory, queried
with MMEM:CDIR command.
<count> Number of files
Example:
See "Working with Files and Directories" on page 476.
Usage: Query only
:MMEMory:CDIRectory <Cdirectory>
Changes the default directory for mass memory storage. The directory is used for all
subsequent MMEM commands if no path is specified with them. It is also possible to change
to a higher directory using two dots '..' .
Setting parameters:
<Cdirectory> <directory_name>
Example:
See "Working with Files and Directories" on page 476.
Usage: Setting only
SCPI confirmed
:MMEMory:COPY <file_source>[,<file_destination>]
Copies an existing to a new file. Instead of just a file, this command can also be used to
copy a complete directory together with all its files.
MMEMory Subsystem