Rohde & Schwarz SMBV100A - [:Source; [: S Ource<Hw>]: B B: a RB: W Segment: C Load

Remote Control Commands
R&S
®
SMBV100A
539Operating Manual 1407.6062.32 ─ 08
[:SOURce<hw>]:BB:ARB:WSEGment:CLOad...................................................................539
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:BLANk:APPend.....................................540
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:CATalog...............................................541
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:CLOCk.................................................541
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:CLOCk:MODE.......................................541
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:COMMent.............................................542
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:DELete.................................................542
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:LEVel[:MODE].......................................542
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:MARKer:ESEGment...............................543
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:MARKer:FSEGment...............................543
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:MARKer:MODE.....................................544
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:OFILe...................................................544
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:SEGMent:APPend.................................545
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:SEGMent:CATalog................................545
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:SELect.................................................545
[:SOURce<hw>]:BB:ARB:WSEGment:CREate..................................................................546
[:SOURce<hw>]:BB:ARB:WSEGment:NAME....................................................................546
[:SOURce<hw>]:BB:ARB:WSEGment:NEXT.....................................................................546
[:SOURce<hw>]:BB:ARB:WSEGment:NEXT:EXECute......................................................547
[:SOURce<hw>]:BB:ARB:WSEGment:NEXT:SOURce.......................................................547
[:SOURce<hw>]:BB:ARB:WSEGment:SEQuence:APPend.................................................548
[:SOURce<hw>]:BB:ARB:WSEGment:SEQuence:SELect..................................................548
[:SOURce<hw>]:BB:ARB:WSEGment?
This command queries the currently output segment of the multi segment waveform.
Return values:
<Wsegment> integer
Range: 0 to 1023
Increment: 1
*RST: 0
Example:
BB:ARB:WSEG?
queries the currently output segment.
Response 2
segment 2 is currently output.
Usage: Query only
[:SOURce<hw>]:BB:ARB:WSEGment:CLOad <Filename>
This command creates a multi segment waveform using the current entries of the speci-
fied configuration file.
This multi segment waveform is saved with the file name specified in the configuration
file . The file extension is *.wv. Digital standard "ARB" is activated, the new multi segment
waveform is loaded and the first segment is output in accordance to the trigger settings.
Setting parameters:
<Filename> string
SOURce Subsystem