Rohde & Schwarz SMBV100A - [: S Ource<Hw>]: L IST: D Exchange: M ODE; [: S Ource<Hw>]: L IST: D Exchange: S Elect

Remote Control Commands
R&S
®
SMBV100A
662Operating Manual 1407.6062.32 ─ 08
Example:
LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL
'/var/smbv/user/listmode/import/list.csv'
selects that ASCII file list.csv is imported.
LIST:DEXC:SEL
'/var/smbv/user/listmode/import/list_imp'
selects that the ASCII file list.csv is imported into list mode list
list_imp.
LIST:DEXC:EXEC
starts the import of the ASCII file data into the list mode file.
Usage:
Event
[:SOURce<hw>]:LIST:DEXChange:MODE <Mode>
The command selects if list mode lists should be imported or exported. Depending on
the selection her, the file select command define either the source or the destination for
list mode lists and ASCII files.
Parameters:
<Mode> IMPort | EXPort
*RST: IMPort
Example:
LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL
'/var/smbv/user/listmode/import/list.csv'
selects that ASCII file list.csv is imported.
LIST:DEXC:SEL
'root/var/smbv/user/listmode/import/list_imp'
selects that the ASCII file list.csv is imported into list mode list
list_imp.
[:SOURce<hw>]:LIST:DEXChange:SELect <Select>
The command selects the list mode list to be imported or exported.
The list mode files are stored with the fixed file extensions *.lsw in a directory of the
user's choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR. A path can also be specified in command SOUR:LIST:DEXC:SEL, in
which case the files are stored or loaded in the specified directory.
Parameters:
<Select> <list_name>
SOURce Subsystem