Remote Control Commands
R&S
®
SMBV100A
663Operating Manual 1407.6062.32 ─ 08
Example:
LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL
‘/var/smbv/user/listmode/import/list.csv'
selects that ASCII file list.csv is imported.
LIST:DEXC:SEL
‘/var/smbv/user/listmode/import/list_imp'
selects that the ASCII file list.csv is imported into list mode list
list_imp.
[:SOURce<hw>]:LIST:DWELl <Dwell>
The command sets the time for which the instrument retains a setting.
Parameters:
<Dwell> float
Range: 0.5 ms to 100 s
Increment: 1E-4
*RST: 10.0 ms
Default unit: s
Example:
LIST:DWEL 15
each setting in the list is retained for 15 ms.
[:SOURce<hw>]:LIST:FREE?
This command queries on the free storage space for list mode lists.
Return values:
<Free> integer
Range: 0 to INT_MAX
Increment: 1
*RST: 0
Example:
LIST:FREE?
Usage: Query only
Response: 2147483647;1
[:SOURce<hw>]:LIST:FREQuency <Frequency>
The command fills the FREQuency part of the selected list with data.
*RST does not affect data lists.
SOURce Subsystem
To Next Page
Loading...
