Rohde & Schwarz SMBV100A - 7.9 Hcopy Subsystem; Hcopy Subsystem

Remote Control Commands
R&S
®
SMBV100A
465Operating Manual 1407.6062.32 ─ 08
Parameters:
<Sregister> ASCii | BINary | HEXadecimal | OCTal
ASCii
The register content is returned as a decimal number.
BINary
The register content is returned as a binary number. #B is placed
in front of the number.
HEXadecimal
The register content is returned as a hexadecimal number. #H is
placed in front of the number.
OCTal
The register content is returned as an octal number. #Q is placed
in front of the number.
*RST:
ASCii
Example:
FORM:SREG HEX
The register content is returned as a hexadecimal number.
7.9 HCOPy Subsystem
The HCOPy subsystem contains the commands to generate a hardcopy of the display.
:HCOPy:DATA...............................................................................................................465
:HCOPy:DEVice.............................................................................................................466
:HCOPy:DEVice:LANGuage............................................................................................466
:HCOPy[:EXECute]........................................................................................................466
:HCOPy:FILE[:NAME].....................................................................................................467
:HCOPy:FILE[:NAME]:AUTO...........................................................................................467
:HCOPy:FILE[:NAME]:AUTO:DIRectory...........................................................................467
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar.................................................................468
:HCOPy:FILE[:NAME]:AUTO:FILE...................................................................................468
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY..........................................................................468
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe...............................................................469
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh.....................................................................469
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe..........................................................469
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer....................................................................469
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix.....................................................................470
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe..........................................................470
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR.......................................................................470
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe............................................................470
:HCOPy:FILE[:NAME]:AUTO:STATe................................................................................471
:HCOPy:IMAGe:FORMat................................................................................................471
:HCOPy:IMAGe:SIZE.....................................................................................................471
:HCOPy:DATA?
The commands transfers the hardcopy data directly as a NByte stream to the remote
client.
HCOPy Subsystem