Remote Control Commands
R&S
®
SMBV100A
548Operating Manual 1407.6062.32 ─ 08
Example:
BB:ARB:WSEG:NEXT:SOUR INT
selects internal next segment source.
[:SOURce<hw>]:BB:ARB:WSEGment:SEQuence:APPend <State>, <Segment>,
<Count>, <Next>
Appends a new segment to the selected sequencing play list.
Setting parameters:
<State> ON | OFF
activates/deactivates the appended segment
*RST: ON
<Segment> integer
indicates the number of the segment as in the multi segment
waveform file
Range: 0 to SegmentCount - 1
Increment: 1
<Count> integer
defines how many times this segment is repeated
Range: 1 to 65535
Increment: 1
<Next> NEXT | BLANk | ENDLess | SEG0 | SEG1 | ... | SEG31 |
0...maxSegment
determines the action after completing the current segment, like
for instance which segment is processed after the processing of
the current one is finished.
Example:
BB:ARB:WSEG:SEQ:SEL
'/var/smbv/user/waveform/play_list_1’
selects the sequencing list play_list_1.wvs.
BB:ARB:WSEG:SEQ:APP ON,3,15,BLANK
appends the segment number 3 as a new segment to the sequenc-
ing list; this segment is activated and will be repeated 15 times and
followed by a blank segment.
Usage: Setting only
[:SOURce<hw>]:BB:ARB:WSEGment:SEQuence:SELect <Filename>
Selects the sequencing list (files with extension *.wvs)
Parameters:
<Filename> string
Example:
BB:ARB:WSEG:SEQ:SEL
'/var/smbv/user/waveform/play_list_1’
selects the sequencing list play_list_1.wvs.
SOURce Subsystem
To Next Page
Loading...
