Instrument Function
R&S
®
SMBV100A
109Operating Manual 1407.6062.32 ─ 08
Firmware
The Firmware section of the menu shows the firmware version and the version of the
software platform.
Note: Your instrument is delivered with the latest firmware version available. Firmware
updates as well as the Release Notes describing the improvements and modifications
are provided on the Internet at the download site of the Rohde & Schwarz Signal gener-
ator home page. This home page always offers the latest information on your signal gen-
erator, e.g. also on changes of the firmware update procedure.
SCPI command:
n.a.
Hardware Options / Software Options
The tables in the sections "Hardware", "Software" and "WinIQSIM2" list the installed
hardware and software options.
"Option"
Short name of option
"Designation"
Name of Option
"Licenses"
(optional)
Number of licenses.
SCPI command:
*OPT on page 435
*IDN on page 434
Loaded Modules
Section "Loaded Modules" is provided for service purposes. It lists all loaded software
modules with their versions and offers a short description of each module.
SCPI command:
n.a.
General Instrument Settings
To Next Page
Loading...
