Instrument Function
R&S
®
SMBV100A
231Operating Manual 1407.6062.32 ─ 08
Edit List Mode Data... - List Mode
Calls the editor for editing the selected list. A list consists of any number of frequency/
level value pairs. The currently selected list is displayed.
"Frequency /
Hz"
Enter the frequency of the frequency/power value pair.
SCPI command:
[:SOURce<hw>]:LIST:FREQuency on page 663
"Power /dBm"
Enter the level of the frequency/power value pair.
SCPI command:
[:SOURce<hw>]:LIST:POWer on page 667
"Goto"
Selects row for editing.
If "Goto row" is selected, a window opens for entering the requested
row.
"Edit"
Calls a selection of possible actions described below.
"Insert Row"
Inserts a new row before the marked row.
RF Signal and Analog Modulations - RF Block
To Next Page
Loading...
