Remote Control Commands
R&S
®
SMBV100A
537Operating Manual 1407.6062.32 ─ 08
Example: Query
BB:ARB:WAV:DATA?
'/var/smbv/user/TEST1.WV','comment'
queries the content of the 'comment' tag of file wave1.wv in the
user directory
Response: "Sine wave for test purposes"
[:SOURce<hw>]:BB:ARB:WAVeform:DELete <Filename>
The command deletes the specified waveform file. If the file is not on the default path,
the path must be specified at the same time. The file extension may be omitted. Only files
with the file extension *.wv will be deleted.
Setting parameters:
<Filename> string
Example:
BB:ARB:WAV:DEL '/var/smbv/user/wave1.wv'
deletes waveform file wave1.wv.
Usage: Setting only
[:SOURce<hw>]:BB:ARB:WAVeform:FREE?
The command queries the free disk space on the default path of the instrument's harddisk.
Return values:
<Free> integer
Range: 0 to INT_MAX
Increment: 1
*RST: 1
Example:
MMEM:CDIR '/var/smbv/user/waveform'
sets the default directory to /var/smbv/user/waveform.
BB:ARB:WAV:FREE?
queries the free disk space in directory /var/smbv/user/waveform.
Usage: Query only
[:SOURce<hw>]:BB:ARB:WAVeform:POINts?
The command queries the number of samples in the waveform file selected using com-
mand :ARB:WAV:SEL. Only the file name has to be entered. Only files with the file
extension *.wv will be read out.
Return values:
<Points> <waveform filename>
Range: 0 to 1000
Increment: 1
*RST: 1
SOURce Subsystem
To Next Page
Loading...
