Remote Control Commands
R&S
®
SMBV100A
620Operating Manual 1407.6062.32 ─ 08
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect <Select>
The command selects the ASCII file to be imported or exported.
The ASCII files are stored with the fixed file extensions *.txt or *.csv in a directory of
the user's choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR. A path can also be specified in command
SOUR:CORR:DEXC:AFIL:SEL, in which case the files are stored or loaded in the speci-
fied directory.
Parameters:
<Select>
<ascii file name>
Example:
CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL
'/var/smbv/user/ucor/import/ucor.csv'
selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL
'/var/smbv/user/ucor/import/ucor_imp'
selects that the ASCII file ucor.csv is imported into user correction
list ucor_imp.
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn <Column>
The command selects the separator between the frequency and level column of the ASCII
table.
Parameters:
<Column> TABulator | SEMicolon | COMMa | SPACe
*RST: SEMicolon|
Example:
CORR:DEXC:MODE EXP
selects that the user correction list is exported into an ASCII file.
CORR:DEXC:AFIL:SEL
'/var/smbv/user/ucor/import/ucor.csv'
selects ASCII file ucor.csv as destination for the user correction
list data.
CORR:DEXC:AFIL:SEP:COL TAB
the pairs of frequency and level values are separated by a tabu-
lator.
CORR:DEXC:AFIL:SEP:DEC DOT
selects the decimal separator dot.
CORR:DEXC:SEL
'/var/smbv/user/ucor/import/ucor_imp'
selects that the user correction list ucor_imp is imported into ASCII
file ucor.csv.
SOURce Subsystem
To Next Page
Loading...
