S-COM 7K - Page 337

Programming Tables
A-37
Command Quick Reference
Page Command Name Form and Data Digit Default User
7-24
Autopatch Timeout Timer
7-25 Select Autopatch Timeout Timer (PW) 65 xxx *
(000-546) = 0.0-54.6 minutes
000 = infinity
001 = 0.1 minute
030 = 3.0 minutes
546 = 54.6 minutes ... etc.
3.0
minutes
7-26 Reset Autopatch Timeout Timer (PW) 81 * none
7-27 Select Autopatch Timeout Warning
Message
(PW) 31 41 (message) * AR in CW
7-27 Review Autopatch Timeout Warning
Message
(PW) 34 41 * none
7-28
Autopatch Access and Passwords
7-29 Access Autopatch With Password (AP access pswd) (phone number) * PW is 10
7-30 Access Autopatch Without Password (phone number) * OFF
(disabled)
7-32 Change Autopatch Access Password (PW) 23 (new AP access password) * PW is 10
7-33 Enable/Disable Autopatch Access
Without Password
(PW) 63 11 x *
0 = OFF (disabled)
1 = ON (enabled)
OFF
disabled
7-34 Autopatch Go Off-Hook (PW) 83 2 * none
7-34 Autopatch Go Off-Hook, Ignore Busy
Logic Input
(PW) 83 3 * none
7-35
Autopatch Call Types
7-36 Select Autopatch Call Types (PW) 60 x *
none = OFF (disabled)
0 = accepted numbers only
1 = operator (0)
2 = xxx-xxxx
3 = 0-xxx-xxxx
4 = 1-xxx-xxxx
5 = 0-xxx-xxx-xxxx
6 = 1-xxx-xxx-xxxx
7 = 1-800-xxx-xxxx, 1-888-xxx-xxxx
8 = xxx-xxx-xxxx
OFF
disabled
7-38
Autopatch Restrictions
7-40 Clear All Accepted Numbers From Table (PW) 68 * table
empty
7-40 Enter Accepted Number Into Table (PW) 68 (phone number) * table
empty
7-42 Clear All Rejected Numbers From Table (PW) 67 * table
empty
7-42 Enter Rejected Number Into Table (PW) 67 (phone number) * table
empty