S-COM 7K - Page 338

7K • Appendix A
A-38
Command Quick Reference
Page Command Name Form and Data Digit Default User
7-44
Autopatch Redialer
7-45 Redial Last Number (PW) 84 * memory
cleared
7-46 Clear Autopatch Redialer (PW) 85 * memory
cleared
7-47
Autopatch Call Counter
7-48 Clear Autopatch Call Counter (PW) 69 * counter
000
7-49
4-35
Send Autopatch Call Count in CW (PW) 86 * counter
000
4-35 Send Autopatch Call Count in Speech (PW) 15 9897 * counter
000
7-50
Phone Line Control Mode
7-53 Select Phone Line Answer Mode, Do Not
Answer
(PW) 64 0 *
(see next
command)
7-53 Select Phone Line Answer Mode (PW) 64 x yy zz *
x = mode (1-4) (See page 7-38)
y = ring-in delay (00-99) rings
z = ringout limit (00-99) rings
mode 3,
ring-in
delay 2,
ringout
limit 1
7-54 Select Phone Line Answer Message (PW) 31 50 (message) * 3 beeps
(74 09 21
33)
7-54 Review Phone Line Answer Message (PW) 34 50 * none
7-55 Select Phone Line Answer Macro (PW) 26 16 (macro name) * none
7-56 Select Control Mode Dump-Triggered
Macro
(PW) 26 81 (macro name) * none
7-57 Select Phone Line Off-Hook Timer (PW) 79 xxx *
(000-546)=0.1-54.6 minutes
000 = infinity
001 = 0.1 minute
030 = 3.0 minutes
546 = 54.6 minutes ... etc.
none
7-58 Monitor Repeater Receiver (Rx1) (PW) 63 23 x *
0 = OFF (disabled)
1 = ON (enabled)
OFF
disabled
7-58 Monitor Repeater Receiver (Rx2) (PW) 63 24 x *
0 = OFF (disabled)
1 = ON (enabled)
OFF
disabled
7-58 Monitor Repeater Receiver (Rx3) (PW) 63 25 x *
0 = OFF (disabled)
1 = ON (enabled)
OFF
disabled
7-58 Talk Out Tx1 (PW) 63 26 x *
0 = OFF (disabled)
1 = ON (enabled)
OFF
disabled
7-58 Talk Out Tx2 (PW) 63 27 x *
0 = OFF (disabled)
1 = ON (enabled)
OFF
disabled