Programming Tables
A-39
Command Quick Reference
Page Command Name Form and Data Digit Default User
7-59
Reverse Patch
7-60 Trigger Reverse Patch (PW) 87 * none
7-61 Answer Reverse Patch (PW) 88 * none
7-62 Select Reverse Patch Ringout Message (PW) 31 51 (message) * 55 in CW
7-62 Review Reverse Patch Ringout Message (PW) 34 51 * none
7-63 Select Ring-Triggered Macro (PW) 26 80 (macro name) *
Note: executes on each ring.
none
7-64
Autopatch Multiple Port Access
7-67 Select Autopatch Access-Triggered
Macro from Rx1
(PW) 26 75 (macro name) * none
7-67 Select Autopatch Access-Triggered
Macro from Rx2
(PW) 26 76 (macro name) * none
7-67 Select Autopatch Access-Triggered
Macro from Rx3
(PW) 26 77 (macro name) * none
7-68 Select Rx1 Autopatch Command
Response Message Routing
(PW) 91 00 x x *
1 = Tx1, 2 = Tx2
1 (Tx1)
7-68 Select Rx2 Autopatch Command
Response Message Routing
(PW) 91 01 x x *
1 = Tx1, 2 = Tx2
1 (Tx1)
7-68 Select Rx3 Autopatch Command
Response Message Routing
(PW) 91 02 x x *
1 = Tx1, 2 = Tx2
1 (Tx1)
8-1
Clock and Calendar
8-2 Set Clock and Calendar (PW) 25 (year, month, day-of-month,
day-of-week, hour, minute) *
year = 00-99
month = 01-12 (Jan is 01)
day-of-month = 01-31
day-of-week = 0-6 (Sun is 0)
hour = 00-23
minute = 00-59
00:00:00,
Wed, Jan
1, 1992
8-4 Adjust Daylight Savings Time (PW) 48 x *
0 = fall back (subtract 1 from hours)
1 = spring ahead (add 1 to hours)
2 = fall back (subtract 1 from hours,
inhibited for 61 minutes.)
none
8-6 Reset Clock Seconds (PW) 48 3 * none
8-7 Add Clock Seconds (PW) 48 4 (seconds) *
seconds = 01-30
none
8-7 Subtract Clock Seconds (PW) 48 5 (seconds) *
seconds = 01-30
none
8-7 Subtract Clock Seconds, Inhibited for 2
Minutes
(PW) 48 6 (seconds) *
seconds = 01-30
(Inhibited for 2 minutes)
none
To Next Page
Loading...