Schweitzer Engineering Laboratories SEL-311C - Figure 7.28 Logic Flow for Example Output Contact Operation-Extra I;O Board (Model 0311 C01 X)

7.35
Date Code 20060320 Instruction Manual SEL-311C Relay
Inputs, Outputs, Timers, and Other Control Logic
Output Contacts
q The PULSE command is also available via the front-panel {CNTRL} pushbutton, “output contact testing” option. Execution
of the PULSE command results in a logical 1 input into the above logic (one-second default pulse width).
w All 12 outputs are configurable as a or b type output contacts. See Figure 2.16 and Figure 2.17 for more information on
selecting output contact type.
Figure 7.28 Logic Flow for Example Output Contact Operation—Extra I/O Board (Model 0311C01x)
Open
Closed
Open
Open
Closed
Open
OUT201 (a)
OUT202 (a)Energized
De-energized
OUT203 (a)
OUT204 (a)
OUT205 (b)
OUT206 (b)Energized
De-energized
De-energized
De-energized
Logical 0
Logical 1
OUT201
OUT202
Logical 0
Logical 0
Logical 0
Logical 1
OUT203
OUT204
OUT205
OUT206
PULSE OUT201
PULSE OUT202
PULSE OUT203
PULSE OUT204
PULSE OUT205
PULSE OUT206
OUT201
OUT202
OUT203
OUT204
OUT205
OUT206
(see w)
OUT210
OUT211
OUT212
Serial
Closed
OUT212 (b)De-energizedLogical 0
OUT212
PULSE OUT212
OpenOUT211 (b)EnergizedLogical 1
OUT211
PULSE OUT211
OpenOUT210 (a)De-energizedLogical 0
OUT210
PULSE OUT210
Port
Commands
(see
q
)
Equations
Settings
Control
PULSE OUT209
PULSE OUT208
PULSE OUT207
OUT207
OUT208
OUT209
Word
Bits
Relay
Contact
Coil States
Output
OUT208
OUT207
OUT209
Logical 1
Logical 0
Logical 0
Example Output
States
Terminal
Contact
Open
Closed
Open
De-energized
Energized
De-energized
(and example
Output Contacts
contact types)
OUT207 (a)
OUT208 (a)
OUT209 (a)
OGIC
SEL
States
Word Bit
Relay