Schweitzer Engineering Laboratories SEL-311C - Figure 11.4 SEL-311 C Front-Panel Pushbuttons-Secondary Functions

11.5
Date Code 20060320 Instruction Manual SEL-311C Relay
Front-Panel Interface (Only on Models With LCD)
Front-Panel Pushbutton Operation
Use left/right arrows to underscore a desired setting digit. Then use the up/
down arrows to change the digit. After the setting changes are complete, press
the {SELECT} pushbutton to select/enable the setting.
Press the {CANCEL} pushbutton to abort a setting change procedure and return
to the previous display. Press the {EXIT} pushbutton to return to the default
display and have the primary pushbutton functions activated again (see
Figure 11.2 and Figure 11.3).
Figure 11.4 SEL-311C Front-Panel Pushbuttons—Secondary Functions
Provides Help Screen
Information When
Viewing or Changing
Settings with
Pushbutton {SET}
SELECTCANCEL
Select Displayed
Option or Setting
EXIT
Exit Entirely and
Return to Default Display
Function
Description
The front-panel display gives indication of the arrow button to use
(Displays symbols: ← → ↑ ↓)
Cancel Setting
Edit or Escape to
Upper Setting Level
LAMP
TEST
TARGET
RESET
Scroll Left on
Display to
Underline Desired
Function or
Setting Digit
Scroll Down on
Display; Decrement
Setting Value
Scroll Up on
Display; Increment
Setting Value
Function
Description
Function
Description
Scroll Right on
Display to
Underline Desired
Function or
Setting Digit