Schweitzer Engineering Laboratories SEL-311C - CSU Command-SEL-311 C

E.11
Date Code 20060320 Instruction Manual SEL-311C Relay
Compressed ASCII Commands
CSU Command—SEL-311C
CSU Command—SEL-311C
Display long summary event report in Compressed ASCII format by sending:
CSU [N[EXT]] [TERSE]
CSU [[ACK] | [TERSE]] [n]
The relay responds to the CSU command with the nth long summary event
report as shown in the example below:
<STX>"FID","0143"<CR>
"FID=SEL-311C-R100-V0-Z001001-D19991203","08E1"<CR>
"MONTH","DAY","YEAR","HOUR","MIN","SEC","MSEC","0ACA"<CR>
8,23,2000,11,51,17,643,"0460"<CR>
"EVENT","LOCATION","HOUR_T","MIN_T","SEC_T","MSEC_T","EVENT_ID","SHOT",
"FREQ","GROUP","HOUR_C","MIN_C","SEC_C","MSEC_C","TARGETS","BREAKER",
"22F6"<CR>
"CAG T",-0.11,11,51,17,643,4, , 60.00,1, , , , ,"SOTF","Open","0C48"<CR>
"IA_PF","IA_DEG_PF","IB_PF","IB_DEG_PF","IC_PF","IC_DEG_PF","IP_PF",
"IP_DEG_PF","IG_PF","IG_DEG_PF","3I2_PF","3I2_DEG_PF","VA_PF","VA_DEG_PF",
"VB_PF","VB_DEG_PF","VC_PF","VC_DEG_PF","2E41"<CR>
2,0.00,1,0.00,1,0.00,1,0.00,4,0.00,0,97.00,0.010,0.00,0.010,45.00,0.010,0.00,"0E35"
<CR>
"IA","IA_DEG","IB","IB_DEG","IC","IC_DEG","IP","IP_DEG","IG","IG_DEG","3I2",
"3I2_DEG","VA","VA_DEG","VB","VB_DEG","VC","VC_DEG","1D07"<CR>
542,-150.42,9743,-178.72,5523,-178.02,10097,-179.15,15746,-177.54,6384,
-16.00,101.190,-179.31,19.430,-177.38,101.610,-179.61,"183D"<CR>
"TRIG","RMB8A RMB7A RMB6A RMB5A RMB4A RMB3A RMB2A RMB1A TMB8A TMB7A TMB6A TMB5A TMB4A
TMB3A TMB2A TMB1A RMB8B RMB7B RMB6B RMB5B RMB4B RMB3B RMB2B RMB1B TMB8B TMB7B
TMB6B TMB5B TMB4B TMB3B TMB2B TMB1B LBOKB CBADB RBADB ROKB LBOKA CBADA RBADA
ROKA","3C70"<CR>
">","0000000000","02FE"<CR>
"*","0000000000","02EA"
If the specified event does not exist, the relay responds:
<STX>"No Data Available","067F"<CR><ETX>
where:
No parameters = Output the newest chronological event summary
ACK = Acknowledge the oldest unacknowledged event
report summary available on this port, or if a number
is supplied, acknowledge the specified summary.
N[EXT] = View oldest unacknowledged event report
n = Display (or acknowledge if ACK present) event
summary with this corresponding number in the
HIS E command.
TERSE = Do not display label headers