E.10
SEL-311C Relay Instruction Manual Date Code 20060320
Compressed ASCII Commands
CEVENT Command—SEL-311C
Each bit in the HEX-ASCII Relay Word reflects the status of a Relay Word
bit. The order of the labels in the “Names of elements in the relay word
separated by spaces” field matches the order of the HEX-ASCII Relay Word.
In the example above, the first two bytes in the HEX-ASCII Relay Word are
“10.” In binary, this evaluates to 00010000. Mapping the labels to the bits
yields:
In this example, the 67P1 element is asserted (logical 1); all others are
deasserted (logical 0).
Table E.2 Mapping Bits to Labels
Labels
Z1T Z2T 50P1 67P1 67P1T 50G1 67G1 67G1T
Bits
00010000
To Next Page
