SET.6 of 6 SEL-311C Settings Sheet Application Setting 221F
SEL-311C Relay Instruction Manual Date Code 20060320
Date________________
Event Report Parameters (See Section 12: Standard Event Reports and SER)
Length of event report (15, 30, 60, 180 cycles) LER =
Length of pre-fault in event report
(1–14 cycles in 1-cycle steps for LER = 15)
(1–29 cycles in 1-cycle steps for LER = 30)
(1–59 cycles in 1-cycle steps for LER = 60)
(1–179 cycles in 1-cycle steps for LER = 180)
PRE =
To Next Page
