Schweitzer Engineering Laboratories SEL-311C - Page 613

Date _______________
Date Code 20060320 Instruction Manual SEL-311C Relay
SET.3 of 6SEL-311C Settings Sheet Application Setting 221-16
SOTF duration (0.50–16000.00 cycles in 0.25-cycle steps) SOTFD =
Other Settings
Minimum trip duration time
(2.00–16000.00 cycles in 0.25-cycle steps)
TDURD =
SELOGIC Control Equation Variable Timers (See Figure 7.24 and Figure 7.25)
SV1 Pickup Time (0.00–999999.00 cycles in 0.25-cycle steps) SV1PU =
SV1 Dropout Time (0.00–999999.00 cycles in 0.25-cycle steps)
SV1DO =
Trip Logic Equations (See Figure 5.1)
Direct trip conditions TR =
Switch-onto-fault trip conditions
TRSOTF =
Reclosing Relay Equations (See Reclosing Relay on page 6.11)
Reclose initiate 79RI =
Drive-to-lockout
79DTL =
Torque Control Equations for Inst./Def.-Time Overcurrent Elements
[Note: torque control equation settings cannot be set directly to logical 0.]
Level 1 residual ground (see Figure 3.22)
67G1TC =
Residual Ground (see Figure 3.25)
51GTC =
SELOGIC Control Equation Variable Timer Input Equations (See Figure 7.24 and
Figure 7.25)
SELOGIC control equation Variable SV1 SV1 =
Output Contact Equations (See Figure 7.27)
Output Contact OUT101 OUT101 =
Output Contact OUT102
OUT102 =
Output Contact OUT103
OUT103 =
Output Contact OUT104
OUT104 =
Output Contact OUT105
OUT105 =
Output Contact OUT106
OUT106 =
Output Contact OUT107
OUT107 =