EasyManua.ls Logo

Schweitzer Engineering Laboratories SEL-311C - Page 629

Schweitzer Engineering Laboratories SEL-311C
748 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A.9
Date Code 20060320 Instruction Manual SEL-311C Relay
Firmware and Instruction Manual Versions
Instruction Manual
Appendix D
➤ Updated A5C0 Relay Definition Block section.
➤ Updated information in ID Message and DNA Message sections.
Appendix H
➤ Updated SEL-311C-Wye DNP Data Map table.
Appendix J
➤ Added Appendix J: Unsolicited Fast SER Protocol.
This manual differs from the previous versions as follows:
20010820
Section 1
➤ Added 220 V control input voltage specification to General Specifications.
➤ Added Terminal Connections information to General Specifications.
Section 2
➤ Updated Figure 2.3, Figure 2.8, Figure 2.9, and Figure 2.10.
Section 3
➤ Updated Figure 3.4, Figure 3.5, and Figure 3.6.
Section 12
➤ Updated Table 12.3.
Section 14
➤ Corrected figure reference error in Application Setting 221C, sheet 2.
This manual differs from the previous versions as follows:
20010625
Appendix A
➤ Modified SEL-311C relays to record consecutive event reports.
➤ Modified the SUM command so that the Breaker Status reports the status from the last row of the event
report.
➤ Changed the E21P default setting to 3C in application settings 221G, 221G5, and 221H.
This manual differs from the previous versions as follows:
20010516
Appendix A
➤ Improved overflow supervision for distance elements.
This manual differs from the previous versions as follows:
20010124
Reissued entire manual to reflect the following changes:
➤ Added cautions, warnings, and dangers in English and French to the reverse of the title page.
Section 1
➤ Updated Relay Specifications format.
➤ Added information on Tightening Torque in General Specifications.
➤ Updated Power Supply information to include medium range Power Supply specification.
➤ Updated Output Contacts information.
Section 2
➤ Updated Relay Dimensions drawing.
➤ Added Product Safety Compliance paragraph.
➤ Corrected Figure Reference in Table 2.5.
➤ Added Danger statement to Accessing the Relay Circuit Boards subsection.
➤ Added Caution statement to the Clock Battery subsection.
Section 3
➤ Updated Table 3.11.
Section 4
➤ Updated figure cross references in Figure 4.2.
Section 5
➤ Corrected Zone LED subsection.
Table A.3 Instruction Manual Revision History (Sheet 5 of 6)
Revision Date Summary of Revisions

Table of Contents