6.17
Date Code 20120126 Instruction Manual SEL-2032 Communications Processor
Database
Region Descriptions
Table 6.7 Local Element Definitions (Sheet 1 of 2)
Row Element Description
0CMD1
CMD2
•
•
•
CMD8
User-defined command number 1 received flag.
User-defined command number 2 received flag.
•
•
•
User-defined command number 8 received flag.
1SBO1
SBO2
SBO3
SBO4
CTS
XOFF
INAC
UMB
Select-before-operate register 1 flag. Pulsed by writing
AAh then 55h to register 0819h within 1.0 second of each other.
Select-before-operate register
2 flag. Controlled by register 081Ah.
Select-before-operate register
3 flag. Controlled by register 081Bh.
Select-before-operate register
4 flag. Controlled by register 081Ch.
Follows the state of CTS input.
Set when port has been
disabled by remote device using XOFF character.
Set when port is inactive.
Data present in unsolicited message buffer flag.
2–3 D1
D2
•
•
•
D12
ARCH1
ARCH2
ARCH3
MSET
Auto-message 1 trigger.
Auto-message 2 trigger.
•
•
•
Auto-message 12 trigger.
Archive 1 auto-message trigger.
Archive 2 auto-message trigger.
Archive 3 auto-message trigger.
Set while Math/Move equations executing.
4–5 DLY1
DLY2
•
•
•
DLY12
DLYA1
DLYA2
DLYA3
DLY
Auto-message 1 trigger overrun flag.
Auto-message 2 trigger overrun flag.
•
•
•
Auto-message 12 trigger overrun flag.
Archive 1 auto-message trigger overrun flag.
Archive 2 auto-message trigger overrun flag.
Archive 3 trigger overrun flag.
Logical OR of DLY1–12 and DLYA1–3.
6–7 BR1
BR2
•
•
•
BR16
Local latch result which may be associated with Breaker 1.
Local latch result which may be associated with Breaker 2.
•
•
•
Local latch result which may be associated with Breaker 16.
8–9 RB1
RB2
•
•
•
RB16
Local latch result which may be associated with Remote Bit 1.
Local latch result which may be associated with Remote Bit 2.
•
•
•
Local latch result which may be associated with Remote Bit 16.
Courtesy of NationalSwitchgear.com
To Next Page
Loading...