Schweitzer Engineering SEL-2032 - Table 9.25 SEL-2032 Ethernet Port DNP3 Protocol Settings

9.44
SEL-2032 Communications Processor Instruction Manual Date Code 20120126
Protocols
Distributed Network Protocol 3.0 (DNP3) LAN/WAN
DNPMPnn setting of DNP3 Master nn, where nn is the master’s identification
number from 01 to 10. The DNPMPnn setting determines which configuration
is used for communication sessions with master nn. For example, if
DNPMP01 is set to 3, DNP3 Ethernet sessions between the SEL-2032 through
its SEL-2701 on Port 17, and DNP Master 01 will employ the custom
mapping file named SET_DNP317.TXT. Mapping files may be used for one
or several sessions, or not at all.
See Custom Data Mapping on page 9.56 for a discussion of how to configure
custom DNP3 maps.
Table 9.25 SEL-2032 Ethernet Port DNP3 Protocol Settings (Sheet 1 of 3)
Name Description Range Default
ENDNP Enable DNP3 (Y, N) Y, N N
DNPADR DNP3 Address (0–65519) 0–65519 0
DNPPNUM DNP3 Port Number for
TCP and UDP (1–65534)
1–65534 20000
DNPMAP DNP3 map Mode (AUTO, CUSTOM) AUTO, CUSTOM AUTO
RPADR01 DNP3 Address for
Master 1 (0–65519)
0–65519 1
DNPIP01 IP Address for Master 1
(www.xxx.yyy.zzz)
20 Char String ""
DNPTR01 Transport Protocol for
Master 1 (UDP, TCP)
TCP, UDP TCP
DNPUP01 UDP Response Port Number for
Master 1 (1–65534, REQ)
REQ, 1–65534 20000
UNSL01 Enable Unsolicited
Reporting for Master 1 (Y, N)
Y, N N
PUNSL01 Enable Unsolicited Reporting
at Power up for Master 1 (Y, N)
Y, N N
DNPMP01 CUSTOM Mode: DNP3 map
associated with Master 1 (1–5)
1–5 “1”
DNPCL01 Enable Controls for Master 1 (Y, N) Y, N N
RPADR02 DNP3 Address for Master 2 (0–65519) 0–65519 1
DNPIP02 IP Address for Master 2
(www.xxx.yyy.zzz)
20 Char String “”
•
•
•
DNPCL02 Enable Controls for Master 2 (Y, N) Y, N N
RPADR03 DNP3 Address for Master 3
(0–65519)
0–65519 1
DNPIP03 IP Address for Master 3
(www.xxx.yyy.zzz)
20 Char String “”
•
•
•
DNPCL03 Enable Controls for Master 3 (Y, N) Y, N N
Courtesy of NationalSwitchgear.com