A.3
Date Code 20120126 Instruction Manual SEL-2032 Communications Processor
Firmware and Manual Versions
Instruction Manual
Instruction Manual
The date code at the bottom of each page of this manual reflects the creation
or revision date.
Table A.2 lists the instruction manual release dates and a description of
modifications. The most recent instruction manual revisions are listed at the
top.
Table A.2 Instruction Manual Revision History (Sheet 1 of 3)
Revision Date Summary of Revisions
20120126
Section 1
➤ Updated Specifications.
Section 3
➤ Added Table 3.1: Factory-Default Passwords for Access Levels 1, 2, and C.
➤ Added PAS C to Step 10 in Set the Passwords, Step by Step.
Section 8
➤ Updated Table 8.1: Access Level Characteristics.
➤ Added CAL command information in Command Set.
Command Summary
➤ Added CAL command.
20110701
Appendix A
➤ Updated for firmware version R114.
20091201
Section 9
➤ Added note to force auto-configure if IED FMR settings have changed.
Appendix A
➤ Updated for firmware version R113.
20090812
Appendix A
➤ Updated for firmware version R112.
20090212
Appendix A
➤ Updated for firmware version R111.
20080620
Section 9
➤ Updated Automatic Data Mapping.
➤ Updated Custom Data Mapping.
Appendix C
➤ Updated Table C.1: SEL-2032 Compatibility Matrix.
20080110
Section 4
➤ Updated Local Intermediate Logic.
Appendix A
➤ Updated for firmware version R110.
20070629
Section 7
➤ Added Restricting Port Access with NOCONN.
Section 9
➤ Updated Fast Message Synchrophasor Settings and Fast Message Synchrophasor Processing.
Appendix A
➤ Updated for firmware version R109.
Courtesy of NationalSwitchgear.com
To Next Page
Loading...