Date Code 20120126 Instruction Manual SEL-2032 Communications Processor
List of Tables
Table 1.1 Communications Type.......................................................................................................... 1.14
Table 1.2 Differences Between the SEL-2030 and SEL-2032............................................................. 1.27
Table 2.1 Main Board Jumper Positions ................................................................................................ 2.1
Table 2.2 Optional I/O Board Contact Form Jumper Positions ............................................................. 2.2
Table 2.3 Serial Port Connector Pin Definitions.................................................................................... 2.6
Table 2.4 Communication Cables for Devices Attached to SEL-2032.................................................. 2.6
Table 3.1 Factory-Default Passwords for Access Levels 1, 2, and C..................................................... 3.2
Table 3.2 Example 2 Front Port Settings (SET P) ................................................................................. 3.6
Table 3.3 Example 2 Relay Port Settings (SET P)................................................................................. 3.6
Table 3.4 Example 2 Port 1 Automatic Messaging Settings.................................................................. 3.8
Table 3.5 Example 2 Modem Port Settings............................................................................................ 3.9
Table 3.6 SEL-311C Global Settings for Synchrophasors................................................................... 3.19
Table 3.7 SEL-311C Serial Port Settings for Synchrophasors............................................................. 3.20
Table 3.8 SEL-2032 DNP LAN/WAN Settings ................................................................................... 3.23
Table 3.9 Example 5 Port 12 Settings .................................................................................................. 3.25
Table 3.10 Example 5 Port 12 Automatic Message Settings ................................................................. 3.25
Table 3.11 Example 6 Port 16 Port Configuration Settings ................................................................... 3.26
Table 3.12 Example 6 Port 16 Port Configuration Settings ................................................................... 3.29
Table 3.13 Example 6 Port 16 Math/Data Movement Settings.............................................................. 3.30
Table 4.1 Unacceptable SEL
OGIC Control Equation Operator Combinations....................................... 4.4
Table 4.2 SEL
OGIC Control Equation Execution Order......................................................................... 4.9
Table 5.1 Special Characters for Use in Strings..................................................................................... 5.2
Table 5.2 Special Message Sequences for Strings ................................................................................. 5.2
Table 5.3 Special Parsing Sequences for Strings ...................................................................................5.6
Table 5.4 Predefined Strings for Auto-Messages with Auto-Configured SEL IEDs............................. 5.7
Table 5.5 Other Predefined Strings for Auto-Messages......................................................................... 5.7
Table 5.6 Predefined Strings for General-Purpose User-Defined Commands....................................... 5.7
Table 6.1 Database Regions for a Single Port........................................................................................ 6.2
Table 6.2 Global Region ........................................................................................................................ 6.4
Table 6.3 Global Elements ..................................................................................................................... 6.9
Table 6.4 Global Element Definitions.................................................................................................. 6.10
Table 6.5 Local Region ........................................................................................................................ 6.11
Table 6.6 Local Elements..................................................................................................................... 6.15
Table 6.7 Local Element Definitions.................................................................................................... 6.17
Table 6.8 Ports 17 and 18 Control Input and Output Elements ........................................................... 6.18
Table 6.9 BUF (Unsolicited Message Queue) Organization................................................................ 6.19
Table 6.10 Data Access by Region Labels............................................................................................. 6.22
Table 7.1 Port Configuration (SET P) Settings Information.................................................................. 7.3
Table 7.2 SEL-2032 Minimum Data Collection Period (in Seconds).................................................. 7.13
Table 7.3 Decode Element Definitions ................................................................................................ 7.17
Table 7.4 Data Type Characteristics..................................................................................................... 7.17
Table 7.5 Example Position Settings.................................................................................................... 7.21
Table 7.6 Automatic Message (SET A) Settings Information ............................................................. 7.23
Table 7.7 User-Defined (SET U) Settings............................................................................................ 7.30
Table 7.8 Logic (SET L) Settings ........................................................................................................ 7.31
Table 7.9 Editing Keys and Commands for SET M and SET R .......................................................... 7.31
Table 7.10 Math/Data Movement Equation Parameters ........................................................................ 7.32
Table 7.11 Global (SET G) Settings and Definitions............................................................................. 7.37
Table 7.12 Logic (SET O) Settings and Definition................................................................................ 7.39
Table 8.1 Access Level Characteristics.................................................................................................. 8.2
Table 8.2 Variations on the FILE Command........................................................................................ 8.10
Table 8.3 Variations of the SER Command ......................................................................................... 8.18
Table 8.4 Examples of Variations on the SET Command.................................................................... 8.19
Table 8.5 Editing Keys for SET Commands ........................................................................................ 8.20
Courtesy of NationalSwitchgear.com
To Next Page
Loading...