Date Code 20120126 Instruction Manual SEL-2032 Communications Processor
Appendix A
Firmware and Manual Versions
Firmware
Determining the
Firmware Version
To find the firmware revision number in your SEL-2032, use the serial port
STATUS command to view the status report.
For firmware versions with the date code of January 15, 2003, or higher, the
FID label will appear as follows with the Part/Revision number in bold:
FID=SEL-2032-R100-V0-Z000000-20030115
The firmware revision number is after the “R” and the release date is after the
“D.” For example:
FID=SEL-2032-R101-V0-Z000000-D20030312
is firmware revision number 101, release date of March 12, 2003.
Table A.1 lists the firmware versions, a description of modifications, and the
instruction manual date code that corresponds to firmware versions. The most
recent firmware version is listed first.
Table A.1 Firmware Revision History—SEL-2032 Instruction Manual (Sheet 1 of 2)
Firmware Identification (FID) Number Description of Changes
Manual
Date Code
SEL-2032-R114-V0-Z003001-D20110701 ➤ Manual update only (see Table A. 2).
20120126
SEL-2032-R114-V0-Z003001-D20110701 ➤ Changed to allow settings change on ports with RTS_CTS
enabled, but CTS deasserted.
➤ Resolved issue with collecting large ASCII reports from the
SEL-2032.
➤ Resolved issue with using multiple virtual terminal sessions.
20110701
SEL-2032-R113-V0-Z003001-D20091201
➤ Added support for more than 127 rows of target data from a relay.
➤ Fixed issue with IRIG signal reporting hour 24 instead of hour 0 at
midnight.
➤ Modified functionality to no longer restrict Fast Messages to static
messages only.
20091201
SEL-2032-R112-V0-Z003001-D20090812
➤ Corrected issue that could cause the SEL-2032 to fail to auto-
configure with an SEL-400 series relay.
20090812
SEL-2032-R111-V0-Z003001-D20090212
➤ Corrected an issue where SEL-2030/2032 port database
information may become temporarily unavailable when certain
connected IEDs, such as the SEL-352, are restarted.
20090212
SEL-2032-R110-V0-Z003001-D20080110
➤ Manual update only (see Table A.2).
20080620
Courtesy of NationalSwitchgear.com
To Next Page
Loading...