Section 06 ST EE RING AND PROPULSION
Subsection 02 (iBR, REVERSE AND VTS)
219100893-029-005_b
219100893-029-004_a
FORWARD
219100893-029-006_a
219100893-029-003_a
REVERSE
219100893-029-007_a
iBR ACTUATOR AIR CHAMBER MOVEMENT
NOTE: The iBR gate w ill move when commanded
by the iBR lever only if the engine is running. For
maintenance purposes, the iBR OVERRIDE func-
tion available through the gauge can b e used to
electrically move the gate to the desired position.
Depending on vehicle speed and how far the iBR
lever i s pulled i n, the iBR module will automatically
adjust the iBR gate movement speed and stroke.
NOTE: The iBR lever must be pulled in at least
25% of its travel (approximately) before the iBR
gate starts to move. The first 25% of iBR lever
travel has no effect on the iBR gate.
219100963-018 169
To Next Page
Loading...
