SeaDoo GTX Series 2022 User Manual

Section 03 ELECTRONIC MANAGEMENT SYSTEMS
Subsection 05 (DIAGNOSTIC AND FAULT CODES)
FAULT CODES
A fault code is an indication that a glitch or mal-
function is detected by the monitoring system of
the vehicle.
When there is a problem, the ECM can provide
fault codes to ease troubleshooting.
The faults registered in the ECM are stored in
memory.
IMPORTANT: After a problem has been solved,
be sure to clear the fault(s) in the ECM using the
BRP diagnostic software (BUDS2). This will prop-
erly reset their states.
HowtoReadFaultCodes
Refer to COMMUNICATION TOOLS subsection.
For more information pertaining to the faults code
status and report, refer to BUDS2 online help.
How to Find Fault Code Descriptions
Connect the vehicle to the BRP diagnostic soft-
ware (BUDS2). Refer to
COMMUNICATION
TOOLS
subsection.
In BUDS2, go to FAULTS page.
Browse lists of active/ occured and inactive fault
codes.
219100893-019 77

SeaDoo GTX Series 2022 Specifications

General

Engine Type	Rotax 1630 ACE
Engine Displacement	1630 cc
Seating Capacity	3
Hull Material	Fiberglass
Fuel Capacity	70 L
Length	345.1 cm
Width	125.5 cm
Fuel Type	Unleaded gasoline
Hull Type	ST3 Hull