SeaDoo GTX Series 2022 User Manual

Section 07 BODY AND HULL
Subsection 01 (BODY)
FRONT GRILLE ASSEMBLY
219100893-032-716_a
Removing the Front Grille Assembly
1. Remove hood.
2. Remove screws and retaining tabs.
219100893-032-736_a
1. Screws
2. Tabs
3. Remove the grille assembly.
Installing the Front Grille Assembly
The installation is the reverse of the removal pro-
cedure. However pay attention to the following.
TIGHTENING TOR
QUE
Grille retaining screw
3.25 N•m ± 0.75 N•m
(29 lbf•in ±7l
bf•in)
CLEAT
219100893-032-730_a
Removing the Cleat
LH side shown, the procedure is the same for
both sides.
Remove:
–Seat
– Center cover
– Front cover
– Side grille.
Remove cover retaining screws and cover.
2191
00893-032-731_a
1. Screw
Remove screws.
219100963-021 227

SeaDoo GTX Series 2022 Specifications

General

Engine Type	Rotax 1630 ACE
Engine Displacement	1630 cc
Seating Capacity	3
Hull Material	Fiberglass
Fuel Capacity	70 L
Length	345.1 cm
Width	125.5 cm
Fuel Type	Unleaded gasoline
Hull Type	ST3 Hull