SeaDoo GTX Series 2022 User Manual

Section 02 ENGINE
Subsection 05 (INTERCOOLER)
219100893-014-004_a
PARTS REMOVED FOR CLARITY
Removing the Intercooler
1. Remove seats. Refer to BODY subsection.
2. Remove engine service c over. Refer to
BODY
subsection.
3. Remove front exhaust hose. Refer to
EX-
HAUST SYSTEM
subsection.
4. Disconnect and remove intercooler air hoses.
219100893-014-005_a
1. Intercooler air hoses
5. Disc
onnect intercooler water hoses and inter-
coo
ler bleed hose.
219100893-014-006_a
1. Intercooler bleed hose
2. Intercooler outlet hose
3. Intercooler inlet hose
6. Untie intercooler straps.
2191
00893-014-007_a
1. Intercooler straps
Installing the Intercooler
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following.
NOTE
: Ensure hoses are routed correctly and
lock
ing ties are positioned at proper locations.
58 219100963-008

SeaDoo GTX Series 2022 Specifications

General

Engine Type	Rotax 1630 ACE
Engine Displacement	1630 cc
Seating Capacity	3
Hull Material	Fiberglass
Fuel Capacity	70 L
Length	345.1 cm
Width	125.5 cm
Fuel Type	Unleaded gasoline
Hull Type	ST3 Hull