General technical data
1-2 Hardware - SIMADYN D
Edition 08.2005
1.1 Installation and EMC guidelines
NOTE
The information in this Manual does not purport to cover all details or
variations in equipment, nor to provide for every possible contingency
to be met in connection with installation, operation or maintenance.
Should further information be desired or should particular problems
arise which are not covered sufficiently for the purchaser’s purposes,
please contact your local Siemens office.
Further, the contents of this Manual shall not become a part of or
modify any prior or existing agreement, commitment or relationship.
The sales contract contains the entire obligation of Siemens. The
warranty contained in the contract between the parties is the sole
warranty of Siemens. Any statements contained herein do not create
new warranties nor modify the existing warranty.
1.1.1 Definitions
1.1.1.1 Qualified personnel
For the purpose of this Manual and product labels, a „Qualified person“ is
someone who is familiar with the installation, mounting, start-up and
operation of the equipment and the hazards involved. He or she must
have the following qualifications, for example:
1. Trained and authorized to energize, de-energize, clear, ground and
tag circuits and equipment in accordance with established safety
procedures.
2. Trained in the proper care and use of protective equipment in
accordance with established safety procedures.
3. Trained in rendering first aid
To Next Page
Loading...
Need help?
General
